Hot Food Well Unit, Drop-In, electric, (5) 12" x 20" individual 20 gauge stainless steel insulated wells, 68"W x 26"D x 15"H (overall), wet operation only, individual thermostatic controls mounted in panel with cord, power indicator light, drip-free flange, individual drain shutoffs, 18 gauge stainless steel top, 18 gauge galvanized exterior housing, includes positioning clips, 3125 watts, 240v/60/1-ph, 13.0 amps, cord with NEMA 6-20P, NSF, cULus, Made in USA (67-1/4"W x 25-1/4"D cutout size, requires 7/8" corner radius) (Refer to vollrathfoodservice.com for full warranty policy)
- Top is 18-gauge stainless steel, 18-8 Type 304, with 3"
- (9.52 mm) overhang on all sides and die-stamped with full perimeter
- drip-edge, and 19" x 11" (50.48 x 30.16 cm)
- Breaker gasket included for installation under drip-edge.
- Flat work surface around opening.
- Deep drawn well is 20-gauge 18-8 stainless steel, 63/4"
- (16.19 cm) deep.
- Standard 1000W or 625W heating element.
- Infinite or thermostatic control.
- Power indicator light.
- Standard drain is ½" (1.27 cm) stainless steel fitting welded
- to pan with ball valve shutoff below exterior housing.
- Manifold drain option is 1" (2.54 cm) copper tubing and
- retains individual well shut-off and adds manifold shutoff.
- Unit insulated on sides, between wells, and below element
- assembly with high-density glass fiber insulation.
- Exterior housing is 20-gauge galvanized steel.
- Drop-in is supplied with stainless steel control panel
- connected to bottom of unit for shipping.
- Control panel may remain on unit or be remote mounted.
- Control wires contained in flexible rubber cord.
- Unit comes with cord and plug and does not require hard
- wiring installation.
- Positioning clips provided to center drop-in within cutout.
- Standard mounting clips adjustable for up to 3" (7.62 cm)
- thick counters.
- Full one-year parts and labor warranty.
- Sheet pan adapter available. Item No. 19186.
- Overall Dimension: 68.00" x 26.00" (172.72 cm x 66.04 cm)
- Cutout Dimensions: 67.25" x 25.25" (170.815 cm x 64.14 cm)
- Opening cutout must have a 7/8" (2.22 cm) corner radius.