Kettle Cabinet Assembly, electric boiler, (2) 20 quart kettles, hand tilt with support arm, 2/3 jacket, mounted on 36" stainless steel cabinet with removable doors, 5" wide drain trough, includes: swing faucet & steam trap, stainless steel construction, 24.0 kW/hr, UL, NSF
- Unit shall be a Groen Model (2) CTDC/3-20-SE, with two 20 quart stainless steel tilting steam jacketed kettles, with cabinet mounted (Specify 24, 36 or 48KW) electric steam
- boiler, per Bulletin 34Gd and as follows:
- Construction
- Kettles shall be Type 304 stainless steel with solid one piece welded construction, with tubular stainless steel support arms. Rim shall be triple reinforced to resist abuse, with a welded “Butterfly” shaped lip, for easy pouring. Kettles shall have two operating handle lugs so that handle can be attached on right or left side.
- Cabinet Base Steam Source
- Unit shall have an electrically heated cabinet mounted pressure boiler to provide approximately 12 PSI steam to the kettles. 36” wide cabinet base shall have stainless steel frame, top deck, double panel access doors, side and rear panels and 6” legs. Front legs shall be adjustable bullet feet while back legs shall have adjustable flanged feet. Cabinet design and trim shall match other HyPLUS™ modular equipment.
- Water Supply Requirements
- All water boiler systems are subject to contamination and failure due to mineral content found in most water supplies. To minimize service problems, a water treatment (softening)
- system is recommended when water quality is found to exceed limits stated below and in operator manual. Recommended MINIMUM water quality standards are: total dissolved solids (TDS) content should not exceed 30 parts per million and the water pH should be 7.0 or higher.
- Origin of Manufacture
- Kettle and cabinet mounted electric steam boiler shall be made in the United States.
- Manufacturer: Groen
- Model: 137682
- Width: 36-1/8"
- Depth: 34-3/16"
- Height: 53-1/8"
- Shipping Weight: 655 lbs.